'No Audio Device' Error
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
steven
Administrator
*******

Posts: 17,615
Joined: Dec 2015
Reputation: 0
#1
03-01-2016, 01:46 PM

If you have experienced a 'No Audio Device' mistake, it most likely means that your sound card isn't fitted properly. Even though other problems can cause this problem, an incorrectly installed sound card will be the most common cause. When the audio card is not correctly connected in the motherboard or you do not have an audio controller connected, you'll get this problem. Also, it's possible that the device you're attempting to use isn't suitable to the motherboard you're using.

Troubleshooting the most typical error

Here are a number of steps to decide to try solve the most frequent mistake, an improperly installed card:

You'll first need to find your audio controlling system or control. This control is what gives the ability to you to modify the sound for every thing. From your start menu, head to your get a handle on panel. Then, visit add hardware and seek out the hardware your-self. If you think you know anything at all, you will seemingly require to learn about houzz.com/pro/dsa/dedicated-sound-and-audio/. Because if it is incorrectly fitted it may not be viewed, don't allow computer look for it immediately. Then, scroll down to sound products and search for your audio control. Check the qualities of the device, and when it is installed correctly see. When it is not fitted precisely you will see an orange featured question mark near the device's name

The best way to solve this problem is to uninstall your audio card and drivers. You'll restart, enter the bios, disable the game interface, music, and midi. Then boot back to windows, go to increase remove programs and ensure that any programs for the unit was removed.

Next, you ought to reinstall the drivers and sound card. It is probable driver updates have been made considering that the sound card was produced and released, so it is advisable to visit the manufacturer's site and see if you can find driver updates. As soon as you do that, restart the computer again. To learn additional information, we recommend people gander at: crunchbase.com/organization/dedicated-sound-and-audio-inc-. The problem is (more than likely) the default unit in audio qualities remains the onboard, the creative devices can be selected by you and it will probably work, but it'll be easier to disable the onboard all together. If you want to learn supplementary information about http://www.crunchbase.com/organization/d...-audio-inc-, we know of thousands of online libraries people can investigate.

Uninstalling and reinstalling the sound card will more than likely fix your trouble. Identify new info on an affiliated URL by visiting facebook.com/dedicatedsoundandaudio/.

Other troubleshooting tips

Try these other troubleshooting a few ideas, If you are still experiencing difficulties.

If you imagine your sound card may be 'dead', before buying a new one, I'd advise borrowing one that's fully working from a friend, if possible, and installing that one to-see if the error is in the card itself.

Try using an alternative PCi slot, like that windows may possibly recognize it as new as opposed to looking to reconfigure it on the slots its currently on. This can also enable you to determine whether among the slots are bad.

If you've an sound card but are attempting to make use of a sound card you bought separately, guarantee the one is disabled.

Generally assure the sound card you buy is compatible with your table. If it doesnt say on the appearance, do a little study on line before the purchase..
cytuj


Forum Jump:


Users browsing this thread: 1 Guest(s)